Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

 


Expanded Metal, Expanded Metal Parts, Expanded Metal Coil
 

If you need

  • EXPANDED METAL PARTS

  • EXPANDED METAL COIL AND CUT PARTS

  • PRE PAINTED EXPANDED METAL PARTS

  • POST PAINTED EXPANDED METAL PARTS

You've come to the right place!

  • Materials available are: aluminum - (.015”-.040” thick) cold rolled steel - (.015”-.032”) thick electro galvanized steel - (.015”-.032” thick) hot dipped galvanized steel - (.015”-.032” thick) copper - (.015”-.040”) thick

  • Coil widths from 2.0625” minimum to 48” wide

  • Coil length usually 2,000 ft

  • LWD ranges from .250”-1.250” 

  • SWD range up to 3/4” 

  • All secondary operations applicable to expanded metal (slit, cut to size, paint, flatten, form, die-cut)

Expanded Metal Terminology
  Expanded Metal   A rigid piece of metal that has been slit and drawn into an open mesh pattern in a single operation.  It is stronger, lighter in weight and more rigid than the original base metal.  Conventional mesh is formed in a diamond pattern.
  Base Metal   Original metal before it is expanded; thickness is usually stated as gauge.
  Finished Thickness   Thickness of expanded metal after it’s final secondary operation(s).
  Strand   One side of expanded metal design. (See Diagram)
  Bond   The solid intersection of two strands - Double the strand width. (See Diagram)
  SWD   Short way of design measured from center of bond to center of bond. (See Diagram)
  LWD   Long way of design measured from center of bond to center of bond. (See diagram)
  Flattened   Expanded metal that has been cold-rolled after expansion, to provide a smooth, flat, and level sheet. The flattening process usually reduces the original gauge of the base metal.
  Unflattened   Expanded metal as it is produced off the expanded metal press with no secondary flattening operation. Material looks similar to a louvered design.
  Coil   Expanded metal that is produced to a specific width and then wound on a core. Typical footage per coil is 2,000 or more feet.
  Cut to length (sheet)   Expanded metal that is produced to a specific width and length.


Expanded Metal Terminology Chart

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts
 

Samples of Expanded Metal Patterns

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts
 

  
   
Sample of Expanded Metal: Micro Mesh Sample of Expanded Metal: Micro Mesh  
Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts  
Sample of Expanded Metal:  Perf Pattern Close Up of Expanded Metal: Perf Pattern  

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

  
 
     

Expanded Metal
Expanded Metal Coil Close up of Expanded Metal Expanded Metal Coil

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts
Expanded Metal Coil
Expanded Metal Coil Wrapped for Shipment
     

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts
     
 
End Use Applications for Expanded Metal Cut to size, Coil, or Sheets
   
Hepa Filters Conical Filters
   

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts
   
Panel Filters

Special Flange Filters

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts

Expanded metal, expanded metal parts, pre-painted expanded metal parts, post-painted expanded metal parts, custom expanded metal parts
 
 
To request Quote choose your state below
 
Contact us

Available through ZAI in the following States:
AL, CT, DC, DE, FL, GA, IL, IN, KY, MA, ME, MD, MI, MS,
NC, NH, NJ, NY, OH, PA, RI, SC, TN, VA, VT, WV, Southern Ontario
 
Helpful Links for Expanded Metal:


National Association of Architectural Metals
 http://www.NAAMM.org
 

Home | Site Map | States Covered | Products Offered | Seeking Representation | Career as Rep

Air Moving Components ► Fan Blades | Blower Wheels | Motorized Blower Packages | Fan Guards | Motor Mounts
Cable ► Miniature Wire Rope Cable | Wire Rope Cable Assemblies | Wire Rope Cable Fittings | Idler Pulleys | Push Pulls
Clamps ► T-Bolt Clamps | V-Retainer Couplings | Hose Clamps | Aerospace Clamps
CNC Machined Parts ►  CNC Precision Machined Parts | CNC Screw Machine Parts | Hydromat CNC Machined Parts
Custom Fabricated Aluminum Extrusions ► Aluminum Extrusions | Fabricated Aluminum Extrusions | Aluminum Shapes
Expanded Metal & Expanded Metal Parts ► Expanded Metal | Expanded Metal Coil & Cut Parts | Painted Expanded Metal Parts
Furnaces, Ovens, Heat Treating ► Furnaces | Chamber Furnace | Melting Furnace | Heat Treat
Injection Molded Plastic Parts ► Custom Injection Molded Plastic Parts | Plastic Injection Molded Tooling & Assemblies
Rivets ► Tubular Rivets | Solid Rivets | Self Piercing Rivets | Rivet Setting Machines
Springs & Wire Forms ► Custom Springs and Wire Forms | Four Slide Parts
Urethane ► Urethane Film | Urethane Tubing | Urethane Sheet and Profiles
 

Zauderer Associates, Inc. Member of MANA & UAMR
Copyright 2006 Zauderer.com All Rights Reserved